Customs Tariff

Section XV

BASE METALS AND ARTICLES OF BASE METAL

Chapter 72

CHAPTER 72 - IRON AND STEEL

Chapter Name
72.01 Pig iron and spiegeleisen in pigs, blocks or other primary forms
I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
— Non-alloy pig iron containing by weight 0,5 % or less of phosphorus
— — Containing by weight not less than 0,4 % of manganese
7201.10.11 — — — Containing by weight 1 % or less of silicon
7201.10.19 — — — Containing by weight more than 1 % of silicon
7201.10.30 — — Containing by weight not less than 0,1 % but less than 0,4 % of manganese
7201.10.90 — — Containing by weight less than 0,1 % of manganese
7201.20.00 — Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
— Alloy pig iron; spiegeleisen
7201.50.10 — — Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
7201.50.90 — — Other
72.02 Ferro-alloys
— Ferro-manganese
— — Containing by weight more than 2 % of carbon
7202.11.20 — — — With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %
7202.11.80 — — — Other
7202.19.00 — — Other
— Ferro-silicon
7202.21.00 — — Containing by weight more than 55 % of silicon
— — Other
7202.29.10 — — — Containing by weight 4 % or more but not more than 10 % of magnesium
7202.29.90 — — — Other
7202.30.00 — Ferro-silico-manganese
— Ferro-chromium
— — Containing by weight more than 4 % of carbon
7202.41.10 — — — Containing by weight more than 4 % but not more than 6 % of carbon
7202.41.90 — — — Containing by weight more than 6 % of carbon
— — Other
7202.49.10 — — — Containing by weight not more than 0,05 % of carbon
7202.49.50 — — — Containing by weight more than 0,05 % but not more than 0,5 % of carbon
7202.49.90 — — — Containing by weight more than 0,5 % but not more than 4 % of carbon
7202.50.00 — Ferro-silico-chromium
7202.60.00 — Ferro-nickel
7202.70.00 — Ferro-molybdenum
7202.80.00 — Ferro-tungsten and ferro-silico-tungsten
— Other
7202.91.00 — — Ferro-titanium and ferro-silico-titanium
7202.92.00 — — Ferro-vanadium
7202.93.00 — — Ferro-niobium
— — Other
7202.99.10 — — — Ferro-phosphorus
7202.99.30 — — — Ferro-silico-magnesium
7202.99.80 — — — Other
72.03 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7203.10.00 — Ferrous products obtained by direct reduction of iron ore
7203.90.00 — Other
72.04 Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204.10.00 — Waste and scrap of cast iron
— Waste and scrap of alloy steel
— — Of stainless steel
7204.21.10 — — — Containing by weight 8 % or more of nickel
7204.21.90 — — — Other
7204.29.00 — — Other
7204.30.00 — Waste and scrap of tinned iron or steel
— Other waste and scrap
— — Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.41.10 — — — Turnings, shavings, chips, milling waste, sawdust and filings
— — — Trimmings and stampings
7204.41.91 — — — — In bundles
7204.41.99 — — — — Other
— — Other
7204.49.10 — — — Fragmentised (shredded)
— — — Other
7204.49.30 — — — — In bundles
7204.49.90 — — — — Other
7204.50.00 — Remelting scrap ingots
72.05 Granules and powders, of pig iron, spiegeleisen, iron or steel
7205.10.00 — Granules
— Powders
7205.21.00 — — Of alloy steel
7205.29.00 — — Other
72.06 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
II. IRON AND NON-ALLOY STEEL
7206.10.00 — Ingots
7206.90.00 — Other
72.07 Semi-finished products of iron or non-alloy steel
— Containing by weight less than 0,25 % of carbon
— — Of rectangular (including square) cross-section, the width measuring less than twice the thickness
— — — Rolled or obtained by continuous casting
7207.11.11 — — — — Of free-cutting steel
— — — — Other
7207.11.14 — — — — — Of a thickness not exceeding 130 mm
7207.11.16 — — — — — Of a thickness exceeding 130 mm
7207.11.90 — — — Forged
— — Other, of rectangular (other than square) cross-section
7207.12.10 — — — Rolled or obtained by continuous casting
7207.12.90 — — — Forged
— — Other
— — — Of circular or polygonal cross-section
7207.19.12 — — — — Rolled or obtained by continuous casting
7207.19.19 — — — — Forged
7207.19.80 — — — Other
— Containing by weight 0,25 % or more of carbon
— — Of rectangular (including square) cross-section, the width measuring less than twice the thickness
— — — Rolled or obtained by continuous casting
7207.20.11 — — — — Of free-cutting steel
— — — — Other, containing by weight
7207.20.15 — — — — — 0,25 % or more but less than 0,6 % of carbon
7207.20.17 — — — — — 0,6 % or more of carbon
7207.20.19 — — — Forged
— — Other, of rectangular (other than square) cross-section
7207.20.32 — — — Rolled or obtained by continuous casting
7207.20.39 — — — Forged
— — Of circular or polygonal cross-section
7207.20.52 — — — Rolled or obtained by continuous casting
7207.20.59 — — — Forged
7207.20.80 — — Other
72.08 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208.10.00 — In coils, not further worked than hot-rolled, with patterns in relief
— Other, in coils, not further worked than hot-rolled, pickled
7208.25.00 — — Of a thickness of 4,75 mm or more
7208.26.00 — — Of a thickness of 3 mm or more but less than 4,75 mm
7208.27.00 — — Of a thickness of less than 3 mm
— Other, in coils, not further worked than hot-rolled
7208.36.00 — — Of a thickness exceeding 10 mm
7208.37.00 — — Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208.38.00 — — Of a thickness of 3 mm or more but less than 4,75 mm
7208.39.00 — — Of a thickness of less than 3 mm
7208.40.00 — Not in coils, not further worked than hot-rolled, with patterns in relief
— Other, not in coils, not further worked than hot-rolled
— — Of a thickness exceeding 10 mm
7208.51.20 — — — Of a thickness exceeding 15 mm
— — — Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of
7208.51.91 — — — — 2050 mm or more
7208.51.98 — — — — Less than 2050 mm
— — Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208.52.10 — — — Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
— — — Other, of a width of
7208.52.91 — — — — 2050 mm or more
7208.52.99 — — — — Less than 2050 mm
— — Of a thickness of 3 mm or more but less than 4,75 mm
7208.53.10 — — — Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm and of a thickness of 4 mm or more
7208.53.90 — — — Other
7208.54.00 — — Of a thickness of less than 3 mm
— Other
7208.90.20 — — Perforated
7208.90.80 — — Other
72.09 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
— In coils, not further worked than cold-rolled (cold-reduced)
7209.15.00 — — Of a thickness of 3 mm or more
— — Of a thickness exceeding 1 mm but less than 3 mm
7209.16.10 — — — Electrical
7209.16.90 — — — Other
— — Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209.17.10 — — — Electrical
7209.17.90 — — — Other
— — Of a thickness of less than 0,5 mm
7209.18.10 — — — Electrical
— — — Other
7209.18.91 — — — — Of a thickness of 0,35 mm or more but less than 0,5 mm
7209.18.99 — — — — Of a thickness of less than 0,35 mm
— Not in coils, not further worked than cold-rolled (cold-reduced)
7209.25.00 — — Of a thickness of 3 mm or more
— — Of a thickness exceeding 1 mm but less than 3 mm
7209.26.10 — — — Electrical
7209.26.90 — — — Other
— — Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209.27.10 — — — Electrical
7209.27.90 — — — Other
— — Of a thickness of less than 0,5 mm
7209.28.10 — — — Electrical
7209.28.90 — — — Other
— Other
7209.90.20 — — Perforated
7209.90.80 — — Other
72.10 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
— Plated or coated with tin
7210.11.00 — — Of a thickness of 0,5 mm or more
— — Of a thickness of less than 0,5 mm
7210.12.20 — — — Tinplate
7210.12.80 — — — Other
7210.20.00 — Plated or coated with lead, including terne-plate
7210.30.00 — Electrolytically plated or coated with zinc
— Otherwise plated or coated with zinc
7210.41.00 — — Corrugated
7210.49.00 — — Other
7210.50.00 — Plated or coated with chromium oxides or with chromium and chromium oxides
— Plated or coated with aluminium
7210.61.00 — — Plated or coated with aluminium-zinc alloys
7210.69.00 — — Other
— Painted, varnished or coated with plastics
7210.70.10 — — Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7210.70.80 — — Other
— Other
7210.90.30 — — Clad
7210.90.40 — — Tinned and printed
7210.90.80 — — Other
72.11 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
— Not further worked than hot-rolled
7211.13.00 — — Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211.14.00 — — Other, of a thickness of 4,75 mm or more
7211.19.00 — — Other
— Not further worked than cold-rolled (cold-reduced)
— — Containing by weight less than 0,25 % of carbon
7211.23.20 — — — Electrical
— — — Other
7211.23.30 — — — — Of a thickness of 0,35 mm or more
7211.23.80 — — — — Of a thickness of less than 0,35 mm
7211.29.00 — — Other
— Other
7211.90.20 — — Perforated
7211.90.80 — — Other
72.12 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
— Plated or coated with tin
7212.10.10 — — Tinplate, not further worked than surface-treated
7212.10.90 — — Other
7212.20.00 — Electrolytically plated or coated with zinc
7212.30.00 — Otherwise plated or coated with zinc
— Painted, varnished or coated with plastics
7212.40.20 — — Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7212.40.80 — — Other
— Otherwise plated or coated
7212.50.20 — — Plated or coated with chromium oxides or with chromium and chromium oxides
7212.50.30 — — Plated or coated with chromium or nickel
7212.50.40 — — Plated or coated with copper
— — Plated or coated with aluminium
7212.50.61 — — — Plated or coated with aluminium-zinc alloys
7212.50.69 — — — Other
7212.50.90 — — Other
7212.60.00 — Clad
72.13 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213.10.00 — Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20.00 — Other, of free-cutting steel
— Other
— — Of circular cross-section measuring less than 14 mm in diameter
7213.91.10 — — — Of a type used for concrete reinforcement
7213.91.20 — — — Of a type used for tyre cord
— — — Other
7213.91.41 — — — — Containing by weight 0,06 % or less of carbon
7213.91.49 — — — — Containing by weight more than 0,06 % but less than 0,25 % of carbon
7213.91.70 — — — — Containing by weight 0,25 % or more but not more than 0,75 % of carbon
7213.91.90 — — — — Containing by weight more than 0,75 % of carbon
— — Other
7213.99.10 — — — Containing by weight less than 0,25 % of carbon
7213.99.90 — — — Containing by weight 0,25 % or more of carbon
72.14 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214.10.00 — Forged
7214.20.00 — Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.30.00 — Other, of free-cutting steel
— Other
— — Of rectangular (other than square) cross-section
7214.91.10 — — — Containing by weight less than 0,25 % of carbon
7214.91.90 — — — Containing by weight 0,25 % or more of carbon
— — Other
— — — Containing by weight less than 0,25 % of carbon
7214.99.10 — — — — Of a type used for concrete reinforcement
— — — — Other, of circular cross-section measuring in diameter
7214.99.31 — — — — — 80 mm or more
7214.99.39 — — — — — Less than 80 mm
7214.99.50 — — — — Other
— — — Containing by weight 0,25 % or more of carbon
— — — — Of a circular cross-section measuring in diameter
7214.99.71 — — — — — 80 mm or more
7214.99.79 — — — — — Less than 80 mm
7214.99.95 — — — — Other
72.15 Other bars and rods of iron or non-alloy steel
7215.10.00 — Of free-cutting steel, not further worked than cold-formed or cold-finished
— Other, not further worked than cold-formed or cold-finished
— — Containing by weight less than 0,25 % of carbon
7215.50.11 — — — Of rectangular (other than square) cross-section
7215.50.19 — — — Other
7215.50.80 — — Containing by weight 0,25 % or more of carbon
7215.90.00 — Other
72.16 Angles, shapes and sections of iron or non-alloy steel
7216.10.00 — U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
— L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21.00 — — L sections
7216.22.00 — — T sections
— U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
— — U sections
7216.31.10 — — — Of a height of 80 mm or more but not exceeding 220 mm
7216.31.90 — — — Of a height exceeding 220 mm
— — I sections
— — — Of a height of 80 mm or more but not exceeding 220 mm
7216.32.11 — — — — With parallel flange faces
7216.32.19 — — — — Other
— — — Of a height exceeding 220 mm
7216.32.91 — — — — With parallel flange faces
7216.32.99 — — — — Other
— — H sections
7216.33.10 — — — Of a height of 80 mm or more but not exceeding 180 mm
7216.33.90 — — — Of a height exceeding 180 mm
— L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.40.10 — — L sections
7216.40.90 — — T sections
— Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216.50.10 — — With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
— — Other
7216.50.91 — — — Bulb flats
7216.50.99 — — — Other
— Angles, shapes and sections, not further worked than cold-formed or cold-finished
— — Obtained from flat-rolled products
7216.61.10 — — — C, L, U, Z, omega or open-ended sections
7216.61.90 — — — Other
7216.69.00 — — Other
— Other
— — Cold-formed or cold-finished from flat-rolled products
7216.91.10 — — — Profiled (ribbed) sheets
7216.91.80 — — — Other
7216.99.00 — — Other
72.17 Wire of iron or non-alloy steel
— Not plated or coated, whether or not polished
— — Containing by weight less than 0,25 % of carbon
7217.10.10 — — — With a maximum cross-sectional dimension of less than 0,8 mm
— — — With a maximum cross-sectional dimension of 0,8 mm or more
7217.10.31 — — — — Containing indentations, ribs, grooves or other deformations produced during the rolling process
7217.10.39 — — — — Other
7217.10.50 — — Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217.10.90 — — Containing by weight 0,6 % or more of carbon
— Plated or coated with zinc
— — Containing by weight less than 0,25 % of carbon
7217.20.10 — — — With a maximum cross-sectional dimension of less than 0,8 mm
7217.20.30 — — — With a maximum cross-sectional dimension of 0,8 mm or more
7217.20.50 — — Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217.20.90 — — Containing by weight 0,6 % or more of carbon
— Plated or coated with other base metals
— — Containing by weight less than 0,25 % of carbon
7217.30.41 — — — Copper-coated
7217.30.49 — — — Other
7217.30.50 — — Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217.30.90 — — Containing by weight 0,6 % or more of carbon
— Other
7217.90.20 — — Containing by weight less than 0,25 % of carbon
7217.90.50 — — Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217.90.90 — — Containing by weight 0,6 % or more of carbon
72.18 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
III. STAINLESS STEEL
7218.10.00 — Ingots and other primary forms
— Other
— — Of rectangular (other than square) cross-section
7218.91.10 — — — Containing by weight 2,5 % or more of nickel
7218.91.80 — — — Containing by weight less than 2,5 % of nickel
— — Other
— — — Of square cross-section
7218.99.11 — — — — Rolled or obtained by continous casting
7218.99.19 — — — — Forged
— — — Other
7218.99.20 — — — — Rolled or obtained by continuous casting
7218.99.80 — — — — Forged
72.19 Flat-rolled products of stainless steel, of a width of 600 mm or more
— Not further worked than hot-rolled, in coils
7219.11.00 — — Of a thickness exceeding 10 mm
— — Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219.12.10 — — — Containing by weight 2,5 % or more of nickel
7219.12.90 — — — Containing by weight less than 2,5 % of nickel
— — Of a thickness of 3 mm or more but less than 4,75 mm
7219.13.10 — — — Containing by weight 2,5 % or more of nickel
7219.13.90 — — — Containing by weight less than 2,5 % of nickel
— — Of a thickness of less than 3 mm
7219.14.10 — — — Containing by weight 2,5 % or more of nickel
7219.14.90 — — — Containing by weight less than 2,5 % of nickel
— Not further worked than hot-rolled, not in coils
— — Of a thickness exceeding 10 mm
7219.21.10 — — — Containing by weight 2,5 % or more of nickel
7219.21.90 — — — Containing by weight less than 2,5 % of nickel
— — Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219.22.10 — — — Containing by weight 2,5 % or more of nickel
7219.22.90 — — — Containing by weight less than 2,5 % of nickel
7219.23.00 — — Of a thickness of 3 mm or more but less than 4,75 mm
7219.24.00 — — Of a thickness of less than 3 mm
— Not further worked than cold-rolled (cold-reduced)
7219.31.00 — — Of a thickness of 4,75 mm or more
— — Of a thickness of 3 mm or more but less than 4,75 mm
7219.32.10 — — — Containing by weight 2,5 % or more of nickel
7219.32.90 — — — Containing by weight less than 2,5 % of nickel
— — Of a thickness exceeding 1 mm but less than 3 mm
7219.33.10 — — — Containing by weight 2,5 % or more of nickel
7219.33.90 — — — Containing by weight less than 2,5 % of nickel
— — Of a thickness of 0,5 mm or more but not exceeding 1 mm
7219.34.10 — — — Containing by weight 2,5 % or more of nickel
7219.34.90 — — — Containing by weight less than 2,5 % of nickel
— — Of a thickness of less than 0,5 mm
7219.35.10 — — — Containing by weight 2,5 % or more of nickel
7219.35.90 — — — Containing by weight less than 2,5 % of nickel
— Other
7219.90.20 — — Perforated
7219.90.80 — — Other
72.20 Flat-rolled products of stainless steel, of a width of less than 600 mm
— Not further worked than hot-rolled
7220.11.00 — — Of a thickness of 4,75 mm or more
7220.12.00 — — Of a thickness of less than 4,75 mm
— Not further worked than cold-rolled (cold-reduced)
— — Of a thickness of 3 mm or more, containing by weight
7220.20.21 — — — 2,5 % or more of nickel
7220.20.29 — — — Less than 2,5 % of nickel
— — Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight
7220.20.41 — — — 2,5 % or more of nickel
7220.20.49 — — — Less than 2,5 % of nickel
— — Of a thickness not exceeding 0,35 mm, containing by weight
7220.20.81 — — — 2,5 % or more of nickel
7220.20.89 — — — Less than 2,5 % of nickel
— Other
7220.90.20 — — Perforated
7220.90.80 — — Other
72.21
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7221.00.10 — Containing by weight 2,5 % or more of nickel
7221.00.90 — Containing by weight less than 2,5 % of nickel
72.22 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
— Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
— — Of circular cross-section
— — — Of a diameter of 80 mm or more, containing by weight
7222.11.11 — — — — 2,5 % or more of nickel
7222.11.19 — — — — Less than 2,5 % of nickel
— — — Of a diameter of less than 80 mm, containing by weight
7222.11.81 — — — — 2,5 % or more of nickel
7222.11.89 — — — — Less than 2,5 % of nickel
— — Other
7222.19.10 — — — Containing by weight 2,5 % or more of nickel
7222.19.90 — — — Containing by weight less than 2,5 % of nickel
— Bars and rods, not further worked than cold-formed or cold-finished
— — Of circular cross-section
— — — Of a diameter of 80 mm or more, containing by weight
7222.20.11 — — — — 2,5 % or more of nickel
7222.20.19 — — — — Less than 2,5 % of nickel
— — — Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
7222.20.21 — — — — 2,5 % or more of nickel
7222.20.29 — — — — Less than 2,5 % of nickel
— — — Of a diameter of less than 25 mm, containing by weight
7222.20.31 — — — — 2,5 % or more of nickel
7222.20.39 — — — — Less than 2,5 % of nickel
— — Other, containing by weight
7222.20.81 — — — 2,5 % or more of nickel
7222.20.89 — — — Less than 2,5 % of nickel
— Other bars and rods
— — Forged, containing by weight
7222.30.51 — — — 2,5 % or more of nickel
7222.30.91 — — — Less than 2,5 % of nickel
7222.30.97 — — Other
— Angles, shapes and sections
7222.40.10 — — Not further worked than hot-rolled, hot-drawn or extruded
7222.40.50 — — Not further worked than cold-formed or cold-finished
7222.40.90 — — Other
72.23
Wire of stainless steel
— Containing by weight 2,5 % or more of nickel
7223.00.11 — — Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
7223.00.19 — — Other
— Containing by weight less than 2,5 % of nickel
7223.00.91 — — Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
7223.00.99 — — Other
72.24 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
— Ingots and other primary forms
7224.10.10 — — Of tool steel
7224.10.90 — — Other
— Other
7224.90.02 — — Of tool steel
— — Other
— — — Of rectangular (including square) cross-section
— — — — Hot-rolled or obtained by continuous casting
— — — — — The width measuring less than twice the thickness
7224.90.03 — — — — — — Of high-speed steel
7224.90.05 — — — — — — Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7224.90.07 — — — — — — Other
7224.90.14 — — — — — Other
7224.90.18 — — — — Forged
— — — Other
— — — — Hot-rolled or obtained by continuous casting
7224.90.31 — — — — — Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7224.90.38 — — — — — Other
7224.90.90 — — — — Forged
72.25 Flat-rolled products of other alloy steel, of a width of 600 mm or more
— Of silicon-electrical steel
7225.11.00 — — Grain-oriented
— — Other
7225.19.10 — — — Hot-rolled
7225.19.90 — — — Cold-rolled
— Other, not further worked than hot-rolled, in coils
7225.30.10 — — Of tool steel
7225.30.30 — — Of high-speed steel
7225.30.90 — — Other
— Other, not further worked than hot-rolled, not in coils
7225.40.12 — — Of tool steel
7225.40.15 — — Of high-speed steel
— — Other
7225.40.40 — — — Of a thickness exceeding 10 mm
7225.40.60 — — — Of a thickness of 4,75 mm or more but not exceeding 10 mm
7225.40.90 — — — Of a thickness of less than 4,75 mm
— Other, not further worked than cold-rolled (cold-reduced)
7225.50.20 — — Of high-speed steel
7225.50.80 — — Other
— Other
7225.91.00 — — Electrolytically plated or coated with zinc
7225.92.00 — — Otherwise plated or coated with zinc
7225.99.00 — — Other
72.26 Flat-rolled products of other alloy steel, of a width of less than 600 mm
— Of silicon-electrical steel
7226.11.00 — — Grain-oriented
— — Other
7226.19.10 — — — Not further worked than hot-rolled
7226.19.80 — — — Other
7226.20.00 — Of high-speed steel
— Other
— — Not further worked than hot-rolled
7226.91.20 — — — Of tool steel
— — — Other
7226.91.91 — — — — Of a thickness of 4,75 mm or more
7226.91.99 — — — — Of a thickness of less than 4,75 mm
7226.92.00 — — Not further worked than cold-rolled (cold-reduced)
— — Other
7226.99.10 — — — Electrolytically plated or coated with zinc
7226.99.30 — — — Otherwise plated or coated with zinc
7226.99.70 — — — Other
72.27 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227.10.00 — Of high-speed steel
7227.20.00 — Of silico-manganese steel
— Other
7227.90.10 — — Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7227.90.50 — — Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7227.90.95 — — Other
72.28 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
— Bars and rods, of high-speed steel
7228.10.20 — — Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228.10.50 — — Forged
7228.10.90 — — Other
— Bars and rods, of silico-manganese steel
7228.20.10 — — Of rectangular (other than square) cross-section, hot-rolled on four faces
— — Other
7228.20.91 — — — Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228.20.99 — — — Other
— Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228.30.20 — — Of tool steel
— — Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228.30.41 — — — Of circular cross-section of a diameter of 80 mm or more
7228.30.49 — — — Other
— — Other
— — — Of circular cross-section, of a diameter of
7228.30.61 — — — — 80 mm or more
7228.30.69 — — — — Less than 80 mm
7228.30.70 — — — Of rectangular (other than square) cross-section, hot-rolled on four faces
7228.30.89 — — — Other
— Other bars and rods, not further worked than forged
7228.40.10 — — Of tool steel
7228.40.90 — — Other
— Other bars and rods, not further worked than cold-formed or cold-finished
7228.50.20 — — Of tool steel
7228.50.40 — — Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
— — Other
— — — Of circular cross-section, of a diameter of
7228.50.61 — — — — 80 mm or more
7228.50.69 — — — — Less than 80 mm
7228.50.80 — — — Other
— Other bars and rods
7228.60.20 — — Of tool steel
7228.60.80 — — Other
— Angles, shapes and sections
7228.70.10 — — Not further worked than hot-rolled, hot-drawn or extruded
7228.70.90 — — Other
7228.80.00 — Hollow drill bars and rods
72.29 Wire of other alloy steel
7229.20.00 — Of silico-manganese steel
— Other
7229.90.20 — — Of high-speed steel
7229.90.50 — — Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7229.90.90 — — Other

Back